M5StickC ESP32 PICO Color LCD Mini IoT Development Board Finger Computer + M5Stack® PowerC HAT Design for M5StickC with IP3005 and IP5209 Power Bank Battery Charger Board
Description:
RED LED & IR Transmitter & BUTTON A & BUTTON B
ESP32 | GPIO10 | GPIO9 | GPIO37 | GPIO39 |
RED LED | LED PIN | |||
IR Transmitter | Transmitter Pin | |||
Button A | Button Pin | |||
Button B | Button Pin |
TFT LCD
Driver IC:ST7735S
Resolution:80 * 160
ESP32 | GPIO15 | GPIO13 | GPIO23 | GPIO18 | GPIO5 |
TFT LCD | TFT_MOSI | TFT_CLK | TFT_DC | TFT_RST | TFT_CS |
GROVE PORT
ESP32 | GPIO33 | GPIO32 | 5V | GND |
GROVE port | SCL | SDA | 5V | GND |
MIC (SPM1423)
ESP32 | GPIO0 | GPIO34 |
MICPHONE | SCL | SDA |
6- posture sensor (MPU6886) & power management IC (AXP192)
ESP32 | GPIO22 | GPIO21 |
6- posture sensor | SCL | SDA |
power management IC | SCL | SDA |
datasheet
Example
Comparision Between Different Development Kits of M5
Description:
PowerC HAT is a charging module specially designed for m5stickc, with built-in ip3005 high-precision lithium battery protection IC and ip5209 power management IC. It uses I2C communication protocol to carry out data transmission with m5stickc of the host computer, and can check the voltage, current and other information through programming. The back battery seat of the module can be installed with two 16340 batteries, which can be charged by the charging module, and can also be used as a charging treasure to provide external power through the battery In addition, the module provides an I2C interface for connecting I2C peripherals, a typec interface for power input, a usb-a bus for power output, with a voltage output of 5V / 1.5A and an input voltage of 5V. The module is equipped with an independent switch, which can be opened once and closed twice.
Product Features:
Battery testing
power bank
Battery charger
IIC Address 0x75
Weight & Dimension:
- Dimension: 55mm x 35mm
- Weight: 19g
Package Included:
1 x M5StickC
1 x USB Type-C cable
1 x PowerC HAT(include battery 2 * 750mAh)